SERVO MOTOR DIGITAL CONSISTENCY TESTER

• Input voltage: DC 5~6V
• Output signal width: 800~2200us
• Can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes
• With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo
• Energized automatically enter manual mode (Manual) 20us
• 50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse
• Button the Select (Note: the key switch function, circulation patterns):

1. S-1 manual mode (Manual)
2. S-2-bit mode (Neutral)
3. S-3 automatic mode (Automatic)

• Keys pulse width:

1. 50H analog servo signal cycle 20us frequency 50Hz
2. 25H digital the steering gear a signal cycle 8us frequency 125Hz
3. 250H Digital Servo signal cycle 4us frequency 250Hz

Notice:
Digital or analog signal button to select the corresponding servos and then plug in the steering servo, to avoid damage to the steering servo.

Reference Video: https://youtu.be/7nuvbHuLU60