USB-TTL-UART WITH FT232

USB to TTL Module board with FT232 chip. User can select either 3.3V or 5V.

Specications:

• 3 power mode FT232 USB UART board type A: 5V output， 3.3V output， or powered by external board (3.3V-5V).

• 3 LEDs: including TXD LED， RXD LED， POWER LED.

• USB Type A Connector

Wiring Connection:
VCCIO: 3.3V or 5V output (the module is powered from USB， onboard jumper should be shorted to 3.3V or 5V)
GND: connect GND
TXD: connect MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
RXD: connect MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
RTS: connect MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
CTS: connect MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)