Name: STEP DOWN IP 6-40V OP 0-36V 3A PRESET - Online Components
SKU: SD-DCDC-3A-LED
Availability: InStock

Descriptions: 
B3603 DC-DC CNC buck module is a fully digital display buck module, small size, high power, high efficiency, stable.

Joined the high-speed micro-controller precision measurement and calculation, the output voltage and current value can be precisely regulated, built-in 10 groups memory locations, can be stored at any time, call up the parameters, easy to use.

With four-digit eight segment LED digital tube, you can display the voltage, current, power, capacity and other parameters in real-time.

Meanwhile, the module has an automatic output after power on and auto-rotate display parameters function, etc., can be turned on or off according to need of use.

Features & spec:

<ul>
<li>
Module type: Non-isolated Buck
</li>
<li>
Input voltage: 6 ~ 40V (input voltage must 1.5V or higher than output voltage)
</li>
<li>
Output voltage: 0 ~ 36V
</li>
<li>
Output current: 0 ~ 3A (stable working current is 2A, continuous long high power working need to strengthen cooling)
</li>
<li>
Voltage regulator / display resolution: 0.01V
</li>
<li>
Power Display minimum resolution: 0.001W
</li>
<li>
Switching frequency: 150KHZ
</li>
<li>
Short circuit protection: Constant
</li>
<li>
Operating temperature: -40 ° C to + 85 ° C
</li>
<li>
Control: Digital Control + Digital Display
</li>
<li>
Conversion efficiency: 92%
</li>
<li>
Current Regulation / Display Resolution: 0.001A
</li>
<li>
Capacity Display minimum resolution: 0.001AH
</li>
<li>
Output ripple: ≤ 50mv
</li>
<li>
Weight: 43g
</li>
</ul>

Display description:

<ul>
<li>
00.00: voltage value, 00.00 ~ 36.00V
</li>
<li>
0.000: current value, 0.000 ~ 3.000A
</li>
<li>
P.000, P0.00, P00.0, P000: power value, unit W, decimal point position changes with the power position changes.
</li>
</ul>

For example: P.123 means 0.123W, P1.23 means 1.23W, P12.3 means 12.3W, P102 means 102W. 
C.000, C0.00, C00.0, C000: capacity value, unit AH, decimal point position is changed with the change of the capacity. 
For example: C.123 means 0.123AH, C1.23 means 1.23AH, C12.3 means 12.3AH, C123 means 123AH.

<ul>
<li>
–0–, –1–, –2-: Special features 0, 1, 2
</li>
<li>
–y-: Open the special features
</li>
<li>
–n-: Close the special function
</li>
<li>
SA.- * (* means 0 to 9): Save the parameters to the storage location of 0 to 9 in any one storage location
</li>
<li>
Lo.- * (* means 0 to 9): Recall stored locations 0-9 arbitrary set of parameters
</li>
</ul>

Usage: 
Connect the input and output correctly, ensure that the input voltage is within the required range, the reverse is strictly prohibited, 
if you are afraid of reversed damage you can concatenate more than 3A diode.

How to set the voltage and current values:

<ol>
<li>
Boot default display is Voltage Set Value. Voltage value display as "00.00", the unit is "V". Press the "SET" button to switch to the Current Set Value,
</li>
<li>
the current value display format is "0.00", the unit is "A", press button to increase the set value, press the button to decrease the value,
</li>
<li>
short press accurately set, long press can quickly set.
</li>
<li>
After the setting is completed press "OK" button to output.
</li>
<li>
Under the output state when display the voltage value press the button can increase the output voltage,
</li>
<li>
pressing the button can reduce the output voltage. Press the button to increase the Current Setting Value when the current value is displayed,
</li>
<li>
press the button can reduce current setting, short press accurately setting, long press can quickly setting.
</li>
<li>
Under the output state short press "OK" button to switch display voltage and current value,
</li>
<li>
long press "OK" button for 3 seconds to auto-rotate display, long press again to cancel the rotate display. In the rotate display,
</li>
<li>
press keys are invalid.
</li>
<li>
Under the output state, press the "SET" button to turn off the output.
</li>
<li>
Above are a simple model of the module, which is the default mode,
</li>
<li>
you can see it is very simple and easy to use if you want to save the recall stored values or see the power,
</li>
<li>
capacity and other parameters in the state of the output, you need to convert to full-function mode.
</li>
</ol>

ONLINE COMPONENTS SDN.BHD.

STEP DOWN IP 6-40V OP 0-36V 3A PRESET

Reviews

AC VOLTAGE CONTROLLER 2KW

ARDUINO LILY PAD

ARDUINO MEGA PROTO SHIELD V3

ARDUINO MEGA2560

ARDUINO UNO SMD

LED DISPLAY METER MINI VOLT OR AMP

LED DISPLAY MINI VOLT AND AMP METER 0-100VDC 50A OR 100A WITH SHUNT

MOTOR DRIVER 4WD L293 6~16VDC 1A

Fast Shipping.

Quality Products.

Secure Payments.

Customer Support.

03-2141 0154